Let us help you tackle any Software issues and optimize your accounting workflow. 

Sage 50 crashes when saving transactions

Sage Timeslips Data Conversion Failed: How to Troubleshoot Database Upgrade Errors

Upgrading Sage Timeslips should make it easier to manage time entries, billing records, client information, and other business data. However, the process can become complicated when the existing database cannot be converted to the format required by the newer version. You may see a conversion error, a message about damaged data, or a process that stops before the upgraded database becomes available. In some cases, Sage Timeslips may display a specific exception, such as tBDEFieldExceptionC, while attempting to read an old database record.

The Sage Timeslips Data Conversion Failed error can occur when upgrading an older BDE database to Sage Timeslips Premium, which uses a Firebird database format. It may also appear when converting data between older Timeslips releases, when the source database contains integrity errors, or when the conversion process is interrupted. A database that opens normally in the previous version is not necessarily free of problems; some structural or record-level issues may only become apparent during conversion.

Before attempting another conversion, protect the original database and determine where the process failed. Repeatedly running the conversion utility against the same damaged or partially converted files can make recovery more difficult. The safest approach is to preserve a verified backup, check the database using the appropriate Timeslips tools, confirm that the conversion is being performed in the correct environment, and then retry only when the source data is ready.

What Does the Sage Timeslips Data Conversion Failed Error Mean?

Sage Timeslips uses a database conversion process when an existing database needs to be updated for a newer release. For example, a legacy Borland Database Engine (BDE) database must be converted to the Firebird format when moving to Sage Timeslips Premium.

This is more than a routine application update. The conversion process reads the original database, interprets its stored information, and creates a database that the newer Timeslips version can use. Depending on the source version and installation type, the process may also ask you to confirm certain data-format choices. A conversion failure means that Timeslips could not complete one or more required operations. The reason may be related to the database itself, the conversion environment, file access, or an interruption.

Common symptoms include:

  • Sage Timeslips displays a database conversion failed message.
  • The conversion wizard stops before completing the upgrade.
  • The application reports that it cannot read damaged or corrupted data.
  • A tBDEFieldExceptionC error appears while processing a database table.
  • Data Verification reports validation, linking, or integrity errors.
  • The conversion process appears stuck or takes unusually long.
  • The converted database does not open correctly in Sage Timeslips Premium.
  • The application cannot locate or access the database after conversion.

The exact message matters. A file-access error, a damaged-record exception, and a failed conversion after an interruption are different problems. Record the full error text, the affected table or field if shown, and the Timeslips versions involved before choosing a repair method.

Common Causes of Sage Timeslips Database Conversion Errors

Several conditions can prevent Sage Timeslips from converting an existing database. The following table summarizes the most common possibilities and the checks that can help identify them.

Possible causeHow it affects conversion
Database corruptionDamaged records, tables, or database structures may prevent Timeslips from reading the source data.
Data Verification errorsValidation, linking, or integrity problems may need to be evaluated and corrected before conversion.
Interrupted conversionStopping the conversion can leave the new database incomplete or unusable.
Incorrect conversion locationA BDE-to-Firebird conversion may fail if it is launched from a workstation instead of the physical server.
Network access problemsUnreliable access to shared files or incorrect database paths can interfere with the process.
Insufficient preparationOther users or applications accessing the database can interfere with conversion.
Unsupported upgrade pathVery old databases may require additional preparation or a version-specific conversion procedure.
Inadequate storage or system resourcesLarge databases may take considerable time and require sufficient available resources.
Damaged index filesCorrupt indexes can cause database errors and may require rebuilding.
Incorrect database selectionSelecting the wrong source database or an incomplete copy can lead to conversion problems.

A failed conversion does not automatically mean that all your Timeslips data is lost. In many cases, the original database can still be recovered or prepared for another attempt. However, if the error identifies damaged records or structural corruption, a more advanced repair may be necessary.

How to Fix Sage Timeslips Data Conversion Failed Error?

Follow the troubleshooting methods below in order. Start by protecting the original database and checking its condition. Move to conversion-specific troubleshooting only after you have confirmed that the source data is available and that the conversion environment meets the requirements.

1. Create a Complete Backup Before Troubleshooting

The first step is to protect the original Sage Timeslips database. Database conversion changes how the information is stored, and a failed attempt may leave the converted copy unusable. You should have a recoverable backup before running verification, repair, or conversion again.

Follow these steps:

  1. Close Sage Timeslips on all workstations.
  2. Ask other users to exit the application completely.
  3. Confirm that no other process or application is actively using the database.
  4. Open the current working version of Sage Timeslips, if it is still accessible.
  5. Use the application’s backup function to create a complete database backup.
  6. Save the backup in a separate location, preferably on a different storage device or protected server location.
  7. Confirm that the backup file exists and has a reasonable file size.
  8. Keep an untouched copy of the original database files as an additional recovery point.

Do not overwrite the only backup with a newer copy created after a failed conversion. Keep the original backup separate from any working or converted database. If Timeslips cannot open the original database, do not assume that copying a few visible files is a complete backup. Database formats may rely on multiple related files. Preserve the entire database folder and consult a qualified Timeslips technician if you are unsure which files are required.

2. Run Data Verification on the Original Database

Database integrity problems are a major reason a Timeslips conversion may fail. Data Verification checks the database for certain errors and, depending on the product version and selected options, can attempt to repair some of them.

For Sage Timeslips 2017 and later, including Timeslips Premium, the Data Verification utility is available through Timeslips Administrator. Older releases may have a different menu location and different verification options. For supported versions, use these steps:

  1. Open Sage Timeslips.
  2. Select Special from the main menu.
  3. Choose Timeslips Administrator.
  4. Locate the Other section.
  5. Select Data Verification.
  6. Confirm that the correct database is selected.
  7. If necessary, use the Change option to select the original database.
  8. Choose Look for Errors Only for the initial check.
  9. Start the verification process and allow it to finish.
  10. Save or print the verification results.

The initial scan helps identify whether the source database contains problems that should be addressed before conversion. Pay attention to the types of errors reported. Validation errors, linking errors, and integrity errors may require different repair approaches. If the report identifies damaged records or structural problems, do not assume that another conversion attempt will resolve them.

Important: Sage’s upgrade guidance recommends checking database integrity before conversion and seeking assistance when errors are detected. A successful verification is useful, but it does not guarantee that every possible conversion problem has been eliminated.

3. Use the Built-In Repair Option Only When Appropriate

If Data Verification identifies errors, the available repair option may correct certain database problems. However, it cannot repair every type of corruption.

In supported Timeslips Premium and Timeslips 2017-or-later versions, the Administrator’s Data Verification utility provides an option to look for and repair errors. It also prompts you to create a backup before proceeding. To use the available repair option:

  1. Confirm that you have a separate backup of the original database.
  2. Open Special > Timeslips Administrator.
  3. Select Data Verification.
  4. Confirm that the correct database is displayed.
  5. Select Look for and Repair Errors.
  6. Review the confirmation message.
  7. Allow Timeslips to create the requested backup.
  8. Start the repair process.
  9. Wait for it to finish without closing the application.
  10. Save the resulting verification report.

After the repair completes, review the results carefully. Check whether the errors were repaired, whether any remain, and whether the report identifies a problem that requires technical assistance. Do not repeatedly run repair operations without reviewing the results. Some errors involve damaged database structures that the built-in utility cannot safely correct. If the utility cannot repair the problem, restore a known-good backup or arrange a professional database repair.

4. Rebuild Data Indices if the Error Involves Index Problems

An index is a supporting database structure that helps Timeslips locate and organize records efficiently. If an index becomes damaged, the application may display unexpected database errors, lists may appear out of order, or certain operations may fail. Rebuilding indexes can help when the verification results specifically indicate index-related problems. It is not a general solution for every database conversion error. Before proceeding:

  • Create a complete backup.
  • Make sure all users have exited Timeslips.
  • Use a working copy of the database when possible.
  • Confirm that the available verification options match your Timeslips version.

In older Timeslips versions, Data Verification may provide a separate Rebuild Data Indices option. In supported releases, use the relevant verification and repair functions provided by that version.

After rebuilding the indexes, run the error check again and review the results. If the database still reports damaged records, validation errors, or unresolved integrity problems, stop and seek database repair assistance before conversion. Do not use third-party database utilities to modify Timeslips database structures. A tool designed for another database engine may damage information that Timeslips requires.

5. Perform BDE-to-Firebird Conversion on the Physical Server

This step is particularly important when moving from a legacy BDE database to Sage Timeslips Premium. Sage’s BDE-to-Firebird conversion guidance specifies that the conversion should be performed on the physical server hosting the database. The Firebird database engine can block conversions initiated from workstations. If you attempt the process from a workstation, the conversion may prompt you to restart it on the server. Follow these checks:

  1. Identify the computer that physically hosts the Timeslips database.
  2. Confirm that Sage Timeslips Premium and its required components are installed on that server.
  3. Make sure all users have closed Timeslips.
  4. Confirm that the source database is available on the server.
  5. Launch the conversion process from the server itself.
  6. Select the existing database that needs to be converted.
  7. Follow the conversion wizard instructions.
  8. Complete the required backup and confirmation steps.
  9. Allow the conversion to finish without interruption.

If the database is stored on a network share, do not assume that running the conversion from a workstation connected to that share is equivalent to running it on the server.

Also distinguish between a local conversion and a network conversion. Sage’s legacy conversion instructions explain that the database location and network-use selection depend on the installation type. Select the option that matches the intended setup rather than choosing a network configuration simply because multiple users will eventually access the database.

6. Confirm the Correct Source Database and Conversion Options

A conversion can fail when Timeslips is pointed to the wrong database or an incomplete copy of the original data. This can happen after moving a database to a new server, copying files manually, or installing a new Timeslips version alongside an older installation. The database selection window may show registered databases, but an older database that is not registered may need to be located manually. Check the source database carefully:

  1. Confirm the database name used by the previous Timeslips installation.
  2. Identify the original database folder.
  3. Make sure you are selecting the intended database rather than a backup or partial copy.
  4. If the database does not appear in the selection window, use the browse option provided by the conversion process.
  5. For a BDE database, locate the appropriate legacy Main.DB file.
  6. Confirm that the selected database belongs to the version you intend to upgrade.
  7. Review any data-format questions shown by the conversion wizard.
  8. Choose the options that accurately reflect your data and installation.

Do not rename, move, or delete original database files simply to make the conversion wizard display them. Preserve the source folder until the new database has been converted and thoroughly checked. If you are unsure which database is the active one, ask your Timeslips administrator or technical support provider to confirm it before proceeding.

7. Check Database Location and Network Access

Sage Timeslips may fail to access a database if the installation path, database folder, or server configuration is incorrect. Although these problems are not always conversion errors, they can prevent the conversion utility from reading the source files or accessing the destination. For a multi-user installation, verify the database location and server configuration before retrying. Check the following:

  • The database folder exists at the expected location.
  • The server can access the source database.
  • The account performing the conversion has the required file permissions.
  • The destination folder is available and has sufficient free space.
  • No user is actively accessing the database.
  • The workstation or server is pointing to the correct Timeslips installation.
  • The database is registered correctly when registration is required.

For Timeslips 2017 and later, Timeslips Administrator includes computer-diagnostic and database-management functions. Depending on the issue, the administrator can help confirm the installation path and database registration. If you receive a message that Timeslips cannot access the database file, investigate the path and registration problem separately. Do not treat every access error as proof that the database is corrupted.

8. Allow the Conversion to Finish Without Interruptions

A large Timeslips database may take considerable time to convert. The duration depends on database size, the amount of stored information, and the computer’s available resources.

A conversion that appears unresponsive is not necessarily frozen. Closing the program, restarting Windows, or shutting down the server during conversion can interrupt the process and damage the converted database. To reduce the risk of interruption:

  1. Schedule the conversion during a period when users will not need Timeslips.
  2. Notify all users that the database will be unavailable.
  3. Close email programs, word processors, and other unnecessary applications.
  4. Make sure the computer is connected to reliable power.
  5. Prevent planned restarts or shutdowns during the conversion.
  6. Allow the wizard to continue even if progress appears slow.
  7. Review the conversion log if the process reports an error.

If the conversion has genuinely failed, do not keep waiting indefinitely or terminate processes at random. Record the error and determine whether the source database remains intact. If the process was interrupted, follow the recovery guidance in the next section.

9. Restore the Original Backup After an Interrupted Conversion

An interrupted conversion is different from a conversion that completes but reports a specific data error. If the process was stopped, the destination database may be incomplete.

Sage’s conversion guidance warns that interruptions can damage the database and require restoring a backup. For this reason, the safest recovery approach is to return to the original source data rather than repeatedly opening or converting the incomplete destination. Use this recovery approach:

  1. Close Sage Timeslips on all computers.
  2. Preserve the incomplete converted database for diagnostic purposes.
  3. Locate the backup created before conversion.
  4. Confirm that it is the correct backup for the source database.
  5. Restore the backup using the appropriate Timeslips restore procedure or recover the preserved original database copy.
  6. Open the restored database in the original Timeslips version, if possible.
  7. Run Data Verification to check its condition.
  8. Resolve any reported errors before attempting conversion again.
  9. Schedule a new conversion when the server and database are ready.

Do not restore a backup over the only copy of the original database. Keep the failed conversion and original files separate until the recovery has been confirmed. If the original database no longer opens, or if the backup also reports errors, contact a qualified Timeslips data-repair specialist before making further changes.

How to Handle Specific Sage Timeslips Conversion Errors?

Some error messages provide more information than the general conversion-failed notification. The following situations deserve separate attention.

tBDEFieldExceptionC During Database Conversion

The tBDEFieldExceptionC exception is associated with problems reading data from a BDE database. It may appear with details such as:

  • Table name
  • Record number
  • Field name
  • BDE error code
  • Exception address

For example, an error identifying the Timekeeper Security table and Personal Settings field suggests that Timeslips encountered a problem while reading a particular data item. This type of message should not be treated as an ordinary installation problem. It may indicate damaged database information. Start by preserving the original database and running Data Verification. If the same exception continues, professional data repair may be required.

1. Data Verification Errors Preventing Conversion

Data Verification errors can indicate that the source database has validation, linking, or integrity problems. These issues may not be obvious during normal Timeslips use.

Run the initial verification without selecting repair options. Save the results and have unresolved errors evaluated before upgrading. If the built-in repair option is used, create a backup first and review its results. Do not assume that a clean verification report guarantees conversion success. Conversion can still fail because of file access, database version, or server configuration problems.

2. BDE-to-Firebird Conversion Fails

A BDE-to-Firebird conversion requires the correct conversion procedure and environment. Sage’s conversion instructions specify that the process should run on the physical server hosting the database.

If the conversion fails from a workstation, move the operation to the server rather than repeatedly trying from different workstations. Confirm that the correct legacy database is selected and that the required backup step is completed.

3. Conversion Fails on a Network Drive

A network location can introduce additional access and configuration considerations. The correct procedure depends on whether the database is being converted for local or multi-user use.

For a local conversion, Sage’s legacy instructions specify copying the database to the local hard drive before conversion. For a multi-user installation, use the network-conversion option and the appropriate server location. For BDE-to-Firebird conversion, follow the requirement to perform the conversion on the physical server. Do not move the database while Timeslips users are working in it.

4. Conversion Fails After a Windows Update

A Windows update may coincide with a conversion failure, but timing alone does not establish that Windows caused the problem. Check whether the update changed access permissions, affected the Timeslips installation, triggered a restart during conversion, or altered the availability of a network location. Also confirm that the Timeslips version and server components remain supported in the current environment.

If the database itself reports damaged records, investigate that problem separately. Avoid uninstalling Windows updates or changing system settings without evidence that they are responsible.

How to Confirm That the Converted Database Is Working?

A conversion wizard reporting success is only the first checkpoint. Before allowing users to resume normal work, confirm that the new database opens correctly and that important information is available. Use the following checks:

  1. Open the converted database in the intended Sage Timeslips version.
  2. Confirm that the database name and company information are correct.
  3. Review client and timekeeper lists.
  4. Open a selection of client records.
  5. Check recent and historical time entries.
  6. Review billing information and relevant bill stages.
  7. Check accounts receivable and funds information where applicable.
  8. Run Data Verification in the new version, if supported.
  9. Confirm that the database is registered and accessible from the intended workstations.
  10. Test normal user access before returning the system to production.

Pay particular attention to information that is important to your firm’s billing and reporting processes. If records appear missing, incomplete, or inconsistent, stop before users begin entering new transactions. Compare the converted database with the preserved original and backup, and seek technical assistance if necessary.

How to Prevent Sage Timeslips Database Conversion Failures?

Preparation is usually more effective than trying to recover a damaged database after a failed upgrade. Use these practices before future conversions.

  • Back up before upgrading: Create a complete backup and keep an additional untouched copy.
  • Run Data Verification: Check the source database before starting conversion.
  • Resolve existing errors: Have unresolved integrity or corruption problems evaluated before upgrading.
  • Confirm the upgrade path: Identify the source and target versions and review any version-specific requirements.
  • Use the correct server: Perform BDE-to-Firebird conversion on the physical server hosting the database.
  • Schedule a maintenance window: Prevent users from accessing the database during conversion.
  • Avoid interruptions: Do not restart, shut down, or terminate the conversion process while it is running.
  • Check storage and permissions: Make sure the server has enough available space and the required access to the source and destination folders.
  • Preserve the original database: Keep the source files and backup until the converted database has been tested.
  • Document the process: Save conversion logs and verification reports for future troubleshooting.

For firms with large databases or older Timeslips installations, it is particularly important to plan the upgrade rather than treating conversion as a routine software installation step.

When to Contact Sage Timeslips Support?

Contact Sage support or a qualified Timeslips database specialist if the conversion continues to fail after you have checked the source database, verified the conversion environment, and reviewed the error details.

Professional assistance is especially important when:

  • Data Verification cannot repair the reported errors.
  • The conversion repeatedly stops at the same record or table.
  • The database produces a tBDEFieldExceptionC exception.
  • The original database cannot be opened.
  • An interrupted conversion has left the destination database incomplete.
  • You are upgrading from a very old Timeslips release.
  • The converted database opens but important records or balances appear incorrect.

Prepare the original database, a separate backup, the conversion log, Data Verification results, and the exact source and target version numbers. This information helps the support specialist understand the failure without relying on guesswork.

Conclusion

The Sage Timeslips Data Conversion Failed error can result from database corruption, unresolved Data Verification errors, an incorrect conversion location, unsupported upgrade procedures, or an interrupted conversion. The right solution depends on the exact error and the Timeslips versions involved.

Start by protecting the original database, checking its integrity, and confirming that the conversion is being performed on the correct server. Use the built-in verification and repair options only when appropriate, and restore a known-good backup if the conversion was interrupted. If the database contains persistent structural errors or a tBDEFieldExceptionC exception, seek professional data repair rather than repeatedly attempting conversion.

Once the conversion succeeds, verify the new database and check important client, timekeeping, and billing information before returning it to everyday use.

FAQs of Sage Timeslips Data Conversion Failed:

Why does Sage Timeslips say data conversion failed?

Sage Timeslips may display this error when it cannot read or convert the source database. Common causes include damaged records, Data Verification errors, incorrect database paths, an unsupported upgrade procedure, or an interrupted conversion. Review the complete error message and conversion log to identify the likely cause.

How do I fix a Sage Timeslips database conversion error?

Start by creating a complete backup of the original database. Run Data Verification in the current Timeslips version and review the results. Correct supported errors, confirm the correct conversion environment, and retry only after the source database is ready. If the same corruption error continues, arrange professional database repair.

Can Data Verification repair a corrupted Sage Timeslips database?

Data Verification can identify database errors and repair certain problems, depending on the Timeslips version and the type of damage. However, it cannot repair every structural or record-level problem. If errors remain after verification, restore a known-good backup or contact Sage Timeslips support or a qualified database specialist.

What does tBDEFieldExceptionC mean in Sage Timeslips?

This exception can occur when Timeslips encounters a problem reading data from a BDE database. The message may identify a table, record, or field that could not be read correctly. Run Data Verification after making a backup. If the exception persists, professional data repair may be necessary.

Why does Sage Timeslips BDE-to-Firebird conversion fail?

BDE-to-Firebird conversion may fail because of damaged source data, incorrect database selection, conversion-location problems, or an interruption. Sage’s conversion guidance specifies performing this conversion on the physical server hosting the database. Confirm the source database and follow the instructions for the relevant installation type.

Can I restart Sage Timeslips conversion if it gets stuck?

Do not interrupt a conversion simply because it appears slow. Large databases may require considerable time. If the process has genuinely failed or was interrupted, preserve the incomplete destination and restore the original database from a reliable backup before attempting conversion again. Do not repeatedly open or convert an incomplete database.

Can I convert an old Sage Timeslips database directly to Timeslips Premium?

The required procedure depends on the original Timeslips version and database format. Many older databases require conversion before they can be used in Timeslips Premium. Some very old releases have additional requirements or separate procedures. Identify the source version and follow its specific conversion guidance before upgrading.

Related Articles